BMW HP2 Enduro (K25H) — OEM Fluid, Tire Pressure & Maintenance Specs
1,170cc Air/Oil-Cooled Boxer Twin SOHC (De-balanced Race Spec) · Source: BMW HP2 Enduro (K25H) (2005–2008) Official Owner’s Manual Maintenance Specifications
According to the BMW HP2 Enduro (K25H) (2005–2008) Official Owner’s Manual Maintenance Specifications, the 2005–2008 BMW HP2 Enduro (K25H) (chassis K25H/0369) requires 3.7 L (3.91 US qt) of SAE 15W-50 (JASO MA2, API SJ / BMW Advantec Pro 15W-50) engine oil for a drain-only change and 4 L (4.23 US qt) with filter service (11427673541 / HF164). Standard solo cold tire pressure is 180 kPa / 1.80 bar / 26 PSI front (90/90-21) and 200 kPa / 2.00 bar / 29 PSI rear (140/80-17), paired with 4× NGK MAR8B-JDS / DCPR8EKC spark plug(s) and a YTX14-BS / BMW 14Ah AGM battery.
Drain only: 3.7 L (3.91 US qt)
R 200 kPa (2.00 bar)
Est. Range: ~241 km (150 mi)
1. Engine Lubrication, Filter & Clutch Specifications
| Clutch Architecture | Dry Single-Plate Manual Clutch (Separate Gearbox Oil) |
|---|---|
| Recommended Viscosity & Grade | SAE 15W-50 (Alt: SAE 20W-50) · JASO MA2 · API SJ / BMW Advantec Pro 15W-50 |
| Oil Volume (Drain / With Filter / Overhaul) |
• Drain only: 3.7 L (3.91 US qt) • With filter/strainer: 4 L (4.23 US qt) • Complete dry overhaul: 4.3 L (4.54 US qt) |
| OEM Oil Filter Code & Type | 11427673541 / HF164 |
| Correct Oil Level Check Method | Hold bike upright on level ground 3–5 min after warm shutdown; read crankcase sight glass |
| Oil Drain Bolt Torque | 32 N·m (23.6 lb-ft / 3.26 kgf·m) — Use fresh crush washer |
| Separate Transmission / Gearbox Oil | 800 ml (0.80 L) — SAE 75W-90 GL-5 (800 ml separate manual gearbox) |
| Final Drive / Bevel Gear Oil | 180 ml (0.18 L) — SAE 75W-90 Hypoid Axle Oil (180 ml Paralever bevel drive) |
2. Cold Tire Pressures, Wheels, Ignition & Drivetrain
| Front / Rear OEM Tire Sizes | Front: 90/90-21 · Rear: 140/80-17 (Tubeless) |
|---|---|
| Cold Tire Pressure — Solo Riding |
Front: 180 kPa / 1.80 bar / 26 PSI Rear: 200 kPa / 2.00 bar / 29 PSI |
| Cold Tire Pressure — 2-Up / Loaded Touring |
Front: 200 kPa / 2.00 bar / 29 PSI Rear: 220 kPa / 2.20 bar / 32 PSI |
| OEM Spark Plug & Quantity | NGK MAR8B-JDS / DCPR8EKC × 4 (Gap: 0.8 mm) |
| OEM Battery Code & Rating | YTX14-BS / BMW 14Ah AGM (12V 14.0Ah MF AGM) |
| Final Drive Maintenance | Cardan Shaft Final Drive — Replace rear bevel-gear hypoid oil at exact measured volume |
| Brake Fluid & Coolant | DOT 4 · Air/Oil-Cooled Engine (No liquid coolant) |
3. Ergonomics, Range & Scheduled Service Intervals
| Displacement · Max Power · Peak Torque | 1170 cc · 105 hp @ 7,000 rpm · 115 N·m (84.8 lb-ft) @ 5,500 rpm |
|---|---|
| Seat Height & Wet Curb Weight | 920 mm (36.2 in) · 195 kg (430 lbs) |
| Fuel Tank & Est. Real-World Range | 13 L (3.4 US gal) · ~18.5 km/L → ~241 km (150 mi) |
| OEM Scheduled Maintenance Intervals |
• First Break-In: 1,000 km • Engine Oil / Filter: 10,000 km / 10,000 km • Air Filter / Spark Plug: 20,000 km / 20,000 km • Valve Clearance Check: 10,000 km |
4. Generation Cutoffs & Real-World Wrenching Gotchas
Model-Year & Chassis Generation Notes
Extreme 195 kg HP-division desert racer stripping out Telelever and the internal balance shaft in favor of 45 mm WP/Marzocchi forks and an air-spring rear shock.
Oil & Clutch Mechanical Engineering Note
BMW air/oil-cooled Boxer platform (R 1150, K25 R 1200, R nineT family, R 12, R 18) featuring an automotive dry single-plate clutch with separate engine, gearbox, and shaft bevel oils.